Non-Silicone gap filler type

Highly Thermally Conductive and Non-Flammable, Non-Silicone Gap Filler Type materials

Features
  • Contains no silicone.
  • Lower thermal resistance.
  • Available in sheets for scoring or die-cutting.
Sarcon® Non Silicone Gap Filler Type Materials
  • SARCON® NR-c
  • General heat transfering.
  • Hot Wire: 1.5 | Hot Disk: 1.3
Variety
Non-Silicone gap filler Variety
Typical Product Properties
Test PropertiesUnitNR-cTest Method
Physical
Properties
Construction(See diagram above)
Thickness*mm0.5 to 3.0ASTM D374
Specific Gravity2.1ASTM D792
HardnessShore OO53ASTM D2240
ColorLight GrayVisual
Electrical
Properties
Volume ResistivityOhm-m1x109ASTM D257
Breakdown VoltagekV/mm11ASTM D149
Dielectric Constant50Hz9.12ASTM D150
110Hz8.55
300kHz5.83
Dissipation Factor50Hz0.152ASTM D150
110Hz0.135
300kHz0.034
Thermal
Properties
Thermal Conductivity unit:W/m-kHot Wire1.5ASTM D2326
Hot Disk1.3ISO/CD 22007-2
Recommended
Operating Temp.
˚C-40 to +105
˚F-40 to +221
Flame Retardant
a) Hardness : the highest value by using Shore OO.
b) Thermal Conductivity :: Measured by using Hot Wire method, refer to Fujipoly Test method
“FTM P-1620”. See Here
: Measured by using Hot Disk method, refer to Fujipoly Test method
“FTM P-1612”. See Here
* Some details of thickness. See Here

Compression Force

Compression
Ratio
NR-c
50N-Tc100N-c200N-c300N-c
10%140
(31.7)
297
(67.3)
116
(26.3)
71
(16.1)
20%330
(74.8)
548
(124.2)
271
(61.4)
168
(38.1)
30%870
(129.1)
794
(179.9)
432
(97.9)
276
(62.5)
40%835
(189.2
1077
(244.0
613
(138.9)
413
(93.6)
50%1161
(236.0)
1316
(298.2)
826
(187.1)
568
(128.7)
Relaxing904
(204.8)
445
(100.8)
310
(70.2)
226
(51.2)

c) Relaxing: Sustain 50% at 1 minute later.
d) Measured by using ASTM D575-91(2012) for reference.

Thermal Resistance

PressureNR-c
50N-Tc100N-c200N-c300N-c
100kPa
14.5psi
4.0
(0.62)
6.6
(1.02)
11.3
(1.75
16.2
(2.52
300kPa
43.5psi
3.8
(0.59)
5.1
(0.78)
8.5
(1.32)
12.5
(1.93)
500kPa
72.5psi
3.7
(0.57)
4.0
(0.61)
7.0
(1.08)
10.2
(1.58)

e) Measureed by using ASTM D5470 equivalent (TIM twster 1300) refer to Fujipoly Test method FTM P-3050

Fujipoly: Thermal Interface Materials
ISO 9001:2015